Power Supply 24V-10AProduct: PS24-10APower 240W
Input Voltage : 100-270V AC / 127 to 370V DC
Output Voltage : 24V DC
Efficiency > 93% @230V AC
Protection Parameter : Output Overload, Output Over Voltage , Output short circuit, Over Temperature
| Input Specification : |
| Supply Voltage |
100 to 270V AC (L-N) / 127 to 370V DC |
| Frequency Range |
50 / 60Hz |
| Power Factor |
> 0.95 @ Full Load |
| AC Current (TYP.) |
2.7A@100V AC, 1.2A@230V AC |
| Efficiency (TYP.) |
>93%@230V AC |
| Start UP time |
<2 sec@230V AC (Full Load) |
| Output Specification : |
| Nominal DC Voltage |
24V DC |
| Output Voltage |
24 - 28V DC |
| Output Current |
10A at 24; 8.57A at 28V |
| Ripple & noise |
<1% of V out |
| Line & Load Regulation |
±1% |
| Hold UP Time |
>13ms at 24V @ 100 /230V AC (Full Load) |
| Protection Parameters: |
| Input Fuse |
4A-250V AC Internal |
| Output Over Load |
110% to 140% of rated output Current protection Protection Type : hiccup mode;recover automatically after fault condition is removed |
| Output Short Circuit |
Hiccup mode when output is shorted;Recovers automatically after fault condition is removed. |
| Output Over Voltage |
SMPS Latches off if output voltage 31V DC ± 0.5V DC |
| Over Temperature |
Power supply shuts down when the temperature goes above specified limit; |
| Turns on automatically after temperature goes back to Normal operating conditions. |
| Physical : |
| Mounting Type |
Din Rail Mount |
| Size |
125 (H) x 55 (W) x 135 (D) |
| Material |
Polycarbonate (PC) |
| Environmental: |
| Working Temperature |
-25°C to 50°C * De-rate output power at 3w/°C above +50°C Ambient |
| Storage Temperature |
-40°C to 85°C |
| Relative Humidity |
95% RH Non-condensing |